Technique: Roland Simard: Painting With Pulp

7 Mar 2008

New Hampshire artist Roland Simard takes papermaking to the next level with his pulp paintings.

by Stephanie Kaplan

0710sima8_462x600
Shadow Pool
2007, fiber, 24 x 18. Collection the artist.

New Hampshire artist Roland Simard’s paintings are all about creating layers of texture. While this is common for many artists, what sets Simard apart is that he uses fibers instead of paint. Although he began his art career working predominantly in oil, a graduate course in papermaking gave Simard a finer appreciation of working with fibers and inspired him to take papermaking to the next level. “I was attracted to how luminous the fiber pigments were in contrast to what you see in paint,” the artist explains, “and it’s a lot of fun to work with the pulp.”

Simard begins his multistep process with a sketch of his composition. “Depending on the image, I will do a very detailed sketch in pastel if the colors are important, or in graphite if  they’re not,” he says. “I do a grid drawing to scale because I can’t draw in the water.” The artist draws inspiration from his natural surroundings in New Hampshire’s White Mountains—as evident in Shadow Pool and Shelburne Birches.

Simard forms the sheet of paper in a large vat of water that sits on a table. A deckle, or frame, is placed in the vat to keep the fibers in place and to maintain the desired size and shape of each sheet. The artist places this drawing on a table next to the vat to provide a guide for the placement of the pulp, and places a mirror above the vat at a 45-degree angle, so he can see the drawing and maintain the correct proportions of the composition.

0710sima9_467x600
Shelburne Birches
2004, fiber, 30 x 24. Private collection.

Simard uses 90 percent cotton fibers in his work because they are easy to process; Spanish flax and abaca make up the other 10 percent because they add strength to the sheet and because the fibers are longer. The fiber combination is processed in a machine called a hollander where a paper beater shreds the fiber to a pulp for approximately 30 minutes to keep the fibers somewhat long. Liquid sizing is added to the processed pulp to strengthen and waterproof the finished sheet.

Next, the artist colors the pulp with pure pigments that won’t fade. “Coloring the pulp is like making your own paint,” Simard explains. He finds great joy in using a kitchen blender to mix various combinations of red, yellow, green, blue, black, brown, and white to create the palette for each work.

The artist favors several tools as “brushes” to place pulp in the water—he places the pulp pieces side by side and on top of each other to create the desired image. His favorite tool is a kitchen fork that only has two tines. He also uses wire pieces and paper clips to create small lines, and uses a string as if it were a pencil—“place the string in the wet pulp, lift it up, and then you get a line” Simard explains. This can be seen at work in the line of the fence in Out to Pasture. In this piece he also relied on other tools to create the varied texture in the sky and wheat field. Out to Sea also demonstrates Simard’s ability to manipulate the pulp into a textured, detail composition—the different layers in the sea mimic waves, while the piece of rope hanging over the bottom edge of the work gives the composition a greater sense of three-dimensionality. The artist also loves using various turkey basters to suck up the pulp and distribute it in the vat of water. He also enjoys pouring and splattering the pulp to achieve his desired effect.

0710sima10_600x460 0710sima11_600x448
Out to Pasture
2006, fiber,18 x 24. Private collection.
Out to Sea
2006, fiber, 18 x 24. Collection the artist.

Since the pulp remains in the vat of water during the entire process, the individual fibers weave and interlock with each other to form a single sheet. Once the artist is satisfied with the composition, he uses a vacuum system he designed to remove water from the vat. “The trick is to keep the water level equal to the level of the fibers,” Simard explains, “so that the fibers float around and find their own level. You want the fibers to move around a little bit, but if there is too much water in the vat then the pulp sinks and you loose a lot of control.” The vacuum system slowly removes the water from underneath the vat, which prevents the fibers from moving. “You can still work on the texture of the piece once the water is removed—even at this point, you can add a small amount of fiber to make things look more 3-D and to fine-tune the image,” Simard states.

Once the sheet is removed from the water, it is placed on wool felt and left to dry for several days. Once the artwork is dry, the sheet is coated and sealed with a clear, liquid polymer and mounted on museum board. This coating archives the sheet for thousands of years. The final product is a hand-cast sheet of paper that, when seen up close, displays abstract layers of texture and color—yet depicts a unified landscape from afar.

0710sima1_600x433 0710sima2_600x433 0710sima3_600x451 0710sima4_400x600
Cotton fibers are processed in the hollander for approximately 30 minutes. Simard uses Aardvark pigments to color white, cotton fibers, which he stores in large buckets. These water-based, concentrated pigments are designed specifically for papermaking and disperse well in the hollander. A retention agent is also added to help the pigment adhere to the fibers. The artist uses a kitchen blender to mix the basic pulp colors into the tints and shades that make up the palette for each work. The pulp can be premixed and stored for later use. Simard adds pigmented pulp to a white pulp base. The fibers are being contained by a Plexiglass deckle that sits within a larger vat of water.
0710sima5_600x534 0710sima6_600x386 0710sima7_600x400
The artist uses a variety of forks and wires to add pulp to the sheet as it is being formed in the vat of water. The forks and wires give Simard more control over his medium, so he can create details using smaller amounts of pulp. Simard uses his favorite tool, a modified fork with two tines, to add pulp to the sheet. Once the sheet is complete, water is removed from the vat using a vacuum system that Simard designed. The water is slowly drawn through the sheet and extracted from underneath the vat. This process keeps the fibers from moving, and preserves the image cast in the sheet.

 


Filed under: , ,
Related Posts
+ Add a comment

Comments

Karen Cochrane wrote
on 27 Mar 2008 10:48 PM
Can't seem to get your outstandingly beautiful painting out of my mind since "Artists in the Park" in Wolfeboro last Aug. What is the cost of "Shadow Pool"? Thanks! Karen C.
Karen Cochrane wrote
on 2 Aug 2008 3:48 PM
Hi. Haven't been able to get your beautiful works of art out of my mind since I saw them in Wolfeboro last year- esp. the birches. Are you coming back to Wolfeboro this month for Arts in the Park? What is your show schedule? I am supposed to be on the Cape the 2nd week in Aug. but would love to see your work again. Thank You. Hope all is well with you. Karen C.